home *** CD-ROM | disk | FTP | other *** search
/ Shareware Overload Trio 2 / Shareware Overload Trio Volume 2 (Chestnut CD-ROM).ISO / dir24 / aprs308.zip / README.SAT < prev    next >
Text File  |  1993-09-15  |  5KB  |  78 lines

  1.                     USING APRS FOR SPACE COMMUNICATIONS
  2.  
  3.      The Automatic Packet Reporting System could be a solution to the effective
  4. use of orbiting terrestrial style packet radio digipeaters in the amateur
  5. satellite program.  To date there have been three standard AX.25 1200 baud FM
  6. transponders flown in space.  The first was on the Space Shuttle STS-35, the
  7. second was on the space station MIR, and the third has been via the FM
  8. transponder mode of AO-21.   The problem with a space based digipeater is the
  9. total saturation on the uplink channel which makes the use of a normal
  10. CONNECTED protocol impractical.  For the SAREX robot QSO mode, a total of five
  11. successive and successful packet transmissions were required to constitute a
  12. successful contact.  Of an estimated thousands of uplink stations, only about
  13. 250 were successful.  Recognizing the stringent requirements for success using
  14. the CONNECTED protocol, provision was also made to recognize those stations
  15. which were successful in getting only one packet heard onboard the shuttle.
  16. Over 700 stations successfully completed single uplink packets.
  17.  
  18.      APRS takes advantage of this unconnected, one packet, mode to demonstrate
  19. successful uplinks to the shuttle.  In addition, however, it capitalizes on the
  20. most fascinating aspect of the amateur radio hobby, and that is the display on
  21. a map of the location of those stations.  Historically, almost every aspect of
  22. HAM radio communications has as its root, the interest in the location of other
  23. stations.  Look at DX maps, countries worked, counties worked, grid squares,
  24. mobile chatter; everyone is quite interested in where other stations are.
  25.  
  26.      If, instead of every station attempting to CONNECT with the Space Shuttle,
  27. all stations were encouraged to simply insert his/her position as the first few
  28. characters of his beacon text, everyone within the satellite footprint would
  29. not only see when he made a successful uplink, but also where he was.  Since
  30. the shuttle is a rapidly moving object, the locations of successful uplink
  31. stations will move progressively along the ground track.  The weakest
  32. successful stations will almost certainly be immediately below the spacecraft.
  33. Stronger and more viable groundstations can show up further to the side of the
  34. ground track.  If there is a skew in the spacecraft antenna pattern, the
  35. pattern of successful uplink stations on the map will clearly make that
  36. evident.  APRS responds to both LAT/LONG and GridSquare formats.  The exact
  37. format of an APRS position report is as follows:
  38.  
  39.    Beacon Text:     !DDMM.HHN/DDDMM.HHW/CQ comments etc.....
  40.    For example:     !3959.11N/07629.12W/Naval Academy Radio Club
  41.  
  42.    Grid Square:     [FM18xf] Naval Academy Radio Club...
  43.  
  44.      To implement this experiment on the next shuttle mission, it would only
  45. take a single AMSAT news bulletin to ask all stations to insert their POSIT
  46. in their beacon text.  No changes onboard the shuttle or MIR would be required.
  47.  
  48. Those stations that had APRS could then watch the successful uplink stations
  49. plotted in real time.  Even without real time APRS, a replay of a captured text
  50. file containing all the successful uplink packets would still give an excellent
  51. map display after the fact.  Analysis of antenna pointing anomolies on every
  52. orbit could be accomplished with ease.  On future missions, the UI beacon frame
  53. might completely replace the current CONNECTED robot mode.  Without all of the
  54. connect requests, acks, and retries at least a five fold increase in the number
  55. of successful uplinks would be realized, and the data exchanged would be more
  56. meaningful by a similar factor.
  57.  
  58.      To demonstrate the expected results of this experiment, I have created a
  59. track history file that can be replayed using the Ctrl-R command.  Simply
  60. replay the SHUTTLE.HST file and watch the contacts appear as the shuttle moves
  61. across the country.  You may enhance the demonstration by selecting to see only
  62. the Shuttle, STS-99, or by turning off TAGS using the Alt-T command to reduce
  63. the clutter of callsigns on the display.  The replay can be speeded up or
  64. slowed down by hitting the F or S keys.  Obviously, in this SHUTTLE.hst file, I
  65. assumed that the Shuttle had its TNC connected to a GPS navigation receiver so
  66. that it was also beaconing its position once per minute in the APRS format.
  67.  
  68.      This capability also demonstrates the practicality of using a space based
  69. AX.25 digipeater for routine position and status reporting.  Imagine a
  70. constellation of three AX.25 digipeater satellites all on one FM channel.  It
  71. would not matter what satellite was in view, or when.  Mobile and portable
  72. stations could beacon their position once every 5 minutes and be tracked
  73. nationwide!  Just using 1200 baud AFSK, up to 1000 stations could probably be
  74. supported just in the US and have a reasonable chance of getting a position
  75. report through at least once every 3 hours!  Going to 9600 baud FSK would
  76. support almost 8000 users.
  77.  
  78.